KE-493G(45) | 智能端頭封邊機，四刀高速跟蹤快又準！
2023-12-12 來自: 蘭州九力機電設備有限責任公司 瀏覽次數:204
雙色PUR上熔膠+快速上熔膠
Pre-melting+PUR gluing system
快速切換不同種類的膠水，操作方便。
Quick change with various type of glue, easy to operate.
快換式上熔膠，拆換便利、快捷膠鍋液位高精儀器監測，自動預熔、自動抽膠粒。
Quick-change glue pot and glue level sensor equipped, EVA glue pre-melts and automatically applies.
獨立控制送帶機構
Independent-control Tape-feeder
送帶。
Efficient&Accurate in Tape feeding.
雙修邊機構
Trimming Units
將突出于木板上下表面多余邊帶切除，使封邊帶上下邊緣與木板的上下表面平齊。
Trim excess edge off the panel top and bottom, to have a level and smooth edging results.
高速跟蹤機構
High Speed Corner-rounding
配備4組高頻電機，圓角仿形修邊快速準，可實現多種倒角修邊工藝。
Equips with 4 trimming motors, fast and stable in corner profiling.
平刮邊機構
Flat Scraping Unit
去除封邊帶與板材之間的多余膠線，除塵效果好，提高封邊質量。
Removes residual glue line for a better edging results.
壓梁自動定位
Pressure beam with auto adjustment
快速切換加工不同厚度的板件，減少調機時間，提高其效率。
Precise & quick adjustment according to workpiece thickness, reducing adjustment time and improving efficiency.
輔助送板裝置
Feeding supporter
送板操作方便平穩，有效防止板材端頭封邊偏位，確保封邊質量。
Stable feeding with small pieces, effectively prevent workpiece out of guide, and ensure for a best edging results.
預銑機構
Pre-milling Unit
標配40mm銑刀（選配65mm），采用雙銑刀對開料產生的波紋痕跡、毛刺或不垂直等現象進行修飾，使封邊條與板材的貼合更加緊密，整體性和美觀度更佳。
Standard with 40T pre-milling cutter, to trim off the defects of panel surface, and thus to achieve a close sticking and a better edge results.
前后齊頭
End-cutting unit
通過精密的直線導軌運動，快速切斷板材前后多余邊帶,確保切斷面平整光滑。
Motions along the precision linear guides, quickly cut off the excess edge at front and rear of the panel to ensure a smooth cut surface.
金剛石修邊刀
Diamond Trimming Cutters
高硬度、高耐磨性。
High-hardness, high wear-resistance.
雙刮邊機構
Scraping unit
消除修邊非直線運動切削過程引起的波紋痕跡，使板材上下部分更加光滑整潔。
Trim off the tools marks, ensuring the best edging quality.
雙固定拋光機構
Buffing units
清除板件上下面的余膠和碎屑。
Clean excess glue and chips off the panel top and bottom.
