雙色PUR上熔膠+快速上熔膠
Pre-melting+PUR gluing system
快速切換不同種類的膠水,操作方便。
Quick change with various type of glue, easy to operate.
快換式上熔膠,拆換便利、快捷膠鍋液位高精儀器監測,自動預熔、自動抽膠粒。
Quick-change glue pot and glue level sensor equipped, EVA glue pre-melts and automatically applies.
獨立控制送帶機構
Independent-control Tape-feeder
送帶。
Efficient&Accurate in Tape feeding.
雙修邊機構
Trimming Units
將突出于木板上下表面多余邊帶切除,使封邊帶上下邊緣與木板的上下表面平齊。
Trim excess edge off the panel top and bottom, to have a level and smooth edging results.
高速跟蹤機構
High Speed Corner-rounding
配備4組高頻電機,圓角仿形修邊快速準,可實現多種倒角修邊工藝。
Equips with 4 trimming motors, fast and stable in corner profiling.
平刮邊機構
Flat Scraping Unit
去除封邊帶與板材之間的多余膠線,除塵效果好,提高封邊質量。
Removes residual glue line for a better edging results.
壓梁自動定位
Pressure beam with auto adjustment
快速切換加工不同厚度的板件,減少調機時間,提高其效率。
Precise & quick adjustment according to workpiece thickness, reducing adjustment time and improving efficiency.
輔助送板裝置
Feeding supporter
送板操作方便平穩,有效防止板材端頭封邊偏位,確保封邊質量。
Stable feeding with small pieces, effectively prevent workpiece out of guide, and ensure for a best edging results.
預銑機構
Pre-milling Unit
標配40mm銑刀(選配65mm),采用雙銑刀對開料產生的波紋痕跡、毛刺或不垂直等現象進行修飾,使封邊條與板材的貼合更加緊密,整體性和美觀度更佳。
Standard with 40T pre-milling cutter, to trim off the defects of panel surface, and thus to achieve a close sticking and a better edge results.
前后齊頭
End-cutting unit
通過精密的直線導軌運動,快速切斷板材前后多余邊帶,確保切斷面平整光滑。
Motions along the precision linear guides, quickly cut off the excess edge at front and rear of the panel to ensure a smooth cut surface.
金剛石修邊刀
Diamond Trimming Cutters
高硬度、高耐磨性。
High-hardness, high wear-resistance.
雙刮邊機構
Scraping unit
消除修邊非直線運動切削過程引起的波紋痕跡,使板材上下部分更加光滑整潔。
Trim off the tools marks, ensuring the best edging quality.
雙固定拋光機構
Buffing units
清除板件上下面的余膠和碎屑。
Clean excess glue and chips off the panel top and bottom.
張經理
1506475353@qq.com
蘭州市城關區雁灘金雁花園17號樓1樓